Are you getting SRS Airbag Error Code B102800indicating that front crash data was stored? This code means that your vehicle was in an accident and now has crash data stored in the ACM airbag control.This code cannot be cleared or erased with any diagnostic scan tool. It will give you the error cannot execute the routine.Warning: Remove restraint system diagnostic tools from the vehicle prior to road testing. If tools are not removed, the supplemental restraint system (SRS) device may not deploy in a crash. Failure to follow this instruction may result in serious personal injury or death in a crash and possibly violate vehicle safety standards.Note: After diagnosing or repairing a Supplemental Restraint System (SRS), the restraint system diagnostic tools (if required) must be removed before operating the vehicle over the road.Note: Deployable devices (such as airbag modules, pretensioners) may deploy alone or in various combinations depending on the impact event.Note: Always refer to the appropriate workshop manual procedures prior to carrying out vehicle repairs affecting the SRS and safety belt system.Note: The SRS must be fully operational and free of faults before releasing the vehicle to the customer.